Steam Turbine Generator Cooler Vs. Hydro Turbine Generator Cooler

Steam Turbine Generator Cooler vs. Hydro Turbine Generator Cooler

 

Core Requirements

Steam Turbine Generator Cooler: Designed for high-speed rotation (3000 r/min/1500 r/min) and high power density (high heat generation per unit volume), requiring an efficient and compact cooling structure.

Hydro Generator Cooler: Designed for low-speed rotation (tens to hundreds of r/min), large dimensions (stator diameters exceeding 10m), requiring balanced, uniform cooling and spatial layout (vertical installation)

 

Mainstream Cooling Methods

Steam Turbine Generator Coolers: Primarily "hydrogen cooling" (for 300MW and above units), followed by "water cooling" (for supercritical units); "air cooling" for smaller units

Hydro-Turbine Generator Coolers:

Medium-to-large units primarily use "air cooling (indirect air cooling with air-to-water heat exchangers)"; giant units employ "water cooling" or "hydrogen cooling".

Steam Turbine Generator Cooler vs Hydro Turbine Generator Cooler

Key Cooler Types:

Steam Turbine Generator Coolers:

1. Hydrogen-water coolers: Core components, typically "tube-fin type," positioned on both sides or atop the motor stator frame. Hydrogen flows outside the tubes while cooling water circulates inside, with fins expanding the heat transfer surface area.

2. Stator water coolers: For water-cooled units, require配套 "water-water heat exchangers" to cool hot water within the stator hollow conductors (secondary cooling).

Hydro-Turbine Generator Coolers:

1. Air-Water Coolers: Most commonly used, typically "tube-fin" or "plate-type," installed within ventilation ducts on the motor's upper or lower frame. Hot air flows outside the tubes while cooling water circulates inside for heat exchange.

2. Rotor Cooler: Some vertical units require a dedicated rotor ventilation cooling system, paired with a small air cooler or water cooler.

 

Structural Design Features

Steam Turbine Generator Cooler: Compact volume (adapted to the narrow, elongated space of horizontal units), high fin density (enhancing heat transfer efficiency), extremely stringent sealing requirements (preventing hydrogen leakage).

Hydro Turbine Generator Coolers: Large dimensions (to fit the annular space of vertical units), typically arranged in annular or multi-group distributed configurations (ensuring uniform circumferential cooling of stator/rotor), with priority given to low air resistance design (suited for low-speed ventilation).

Steam Turbine Generator Cooler vs Hydro Turbine Generator Cooler

You Might Also Like

Send Inquiry