Advantages Of Box Type Coolers Over Other Coolers

1, Integrated structure, huge advantages in installation and land occupation
Integrated molding, easy on-site installation
Ordinary coolers require on-site assembly of heat exchangers, water pumps, filters, pipelines, and valves.
Box type cooler: pre installed in the factory, only the inlet and outlet pipes and power lines need to be connected on site.
compact footprint
Compact structure, saving 30% to 50% space compared to traditional shell and tube designs.
Especially suitable for the renovation of old factories, compressed air stations with limited space, and computer rooms.

2, Higher heat exchange efficiency and better energy-saving effect
The heat transfer coefficient is much higher than that of ordinary shell and tube type
Internally, high-efficiency plate/fin heat exchange cores are commonly used, with strong turbulence and a large heat transfer area.
Under the same heat exchange capacity, the volume is smaller and the temperature rise/fall is more stable.
More comprehensive heat recovery
In air compressor heat recovery, oil temperature cooling, and process water cooling, the recovery efficiency is higher and the effluent temperature is more stable.

3, Stronger sealing and anti-corrosion, longer lifespan
Fully enclosed box structure
Dustproof, rainproof, corrosion-resistant, and debris proof.
It can also be used stably in outdoor, humid, and dusty environments.
Reasonable internal flow channel design
Not easy to scale and block, with a longer cleaning and maintenance cycle.
Integrated insulation
The box comes with an insulation layer to reduce cooling/heat loss, making the system more energy-efficient.

4, Stable operation, more friendly to the host
Low pressure loss
Smooth flow path, low resistance, does not affect the back pressure of the air compressor and compressor.
Temperature control stability
Uniform water flow and heat transfer, with minimal fluctuations in oil and water temperature.
It is of great significance to protect centrifugal air compressors and screw machines and reduce high temperature alarms.

5, More convenient maintenance and lower operation and maintenance costs
Reserved maintenance space, modular design
Open the box for inspection, replacement of gaskets, and cleaning of the core.
leak-proof
Factory pre installed+strong sealing structure, with very few leakage points on site.
Easy to clean and maintain
It is easier to disassemble and clean than traditional shell and tube methods, and does not affect production for too long.