What Are The Characteristics Of Shell And Tube Evaporators?

 

What are the characteristics of shell and tube evaporators?

 

Shell and tube evaporators, refrigeration evaporators a simple structure, easy maintenance, high heat transfer characteristics of the heat exchanger, single circuit, and double circuit, specifically designed for air conditioning units, refrigeration systems, heat pump units, and production and processing systems, generally applicable to chemical plant cooling, power plants, refrigeration machinery and equipment and other major uses.

 

Shell and tube evaporators are very commonly used due to their actual good heat transfer, compact structure, small footprint, and easy installation. The structural characteristics of the industrial chiller shell and tube evaporator are the same as those of the vertical shell and tube condenser. In order to control the moderate flow rate, the refrigerant carrier enters from under the bearing end cap and exits from the upper end, flowing back and forth between the evaporator and the bearing end cap into a multi-programmed flow. The refrigerant flows in the tube, the refrigerant liquid after the throttle enters from the bottom or side of the evaporator, and the air is discharged from the upper end.

 

The thermal conductivity of a shell and tube evaporator is greater in the liquid than in the vapor and is better when flowing than when stopped.
Shell and tube evaporator work, should retain a certain amount of liquid refrigerant, liquid level meter by the float valve operation, the relative height of the static liquid level should be the head diameter, the vast majority of condenser immersed in the liquid, in the form of the liquid heat exchanger. Therefore, the actual effect of heat transfer is good and the thermal conductivity is relatively large. However, the liquid level meter should not be too high, otherwise, the liquid collection of the industrial chiller will occur.

 

shell and tube evaporator

 

Structural characteristics of shell and tube evaporator:
The structural characteristics of the shell and tube evaporator are basically the same as those of the shell and tube condenser. The difference is that the evaporator is the refrigerant flowing in the pipe and the refrigerant carrier flowing in the pipe.
Whether it is a shell and tube condenser or a shell and tube evaporator, the key production and processing processes and common raw materials are the same. All are made from large steel cylinders, which are then formed in a welded installation with varying numbers of low-ribbed air conditioning copper tubes protected into two separate safe passages. Through application over time, cracks and leaks can form in some of the low-ribbed air conditioning copper tubes due to raw material fatigue or product quality issues with the raw material itself; the welding of the low-ribbed air conditioning copper tubes and the simplified word barrel can also cause cracks or sand hole leaks due to welding material fatigue or welding product quality issues.

 

You Might Also Like

Send Inquiry