Gas Turbine Generator Air Water Coolers
Gas Turbine Generator Air Water Cooler
Principle of operation:
Generator air-water cooler is a compact heat exchanger. It consists of several sets of heat exchanger tubes and fins, water chamber, tube plate, side beams and other components. The fins and heat exchanger tubes are expanded to achieve full contact and efficient heat transfer; the two ends of the heat exchanger tubes are sealed with the tube plate at both ends by strength expansion; the sealing between the tube plate and the water chamber is achieved by sealing gasket and threaded connection.
Cooling medium from the water chamber of the inlet into the heat exchanger tube, after one or more returns, and then by the water chamber of the outlet back to the circulating water system, the refrigerant through the heat exchanger tube and its outside of the fins will be covered by the transfer of cold heat exchange with the generator in the superheated gases, to maintain the temperature of the gas inside the generator is lower than the set value, to ensure that the equipment at a certain temperature within the regular operation of the temperature. A fan system usually accompanies the gas inside the generator to guide the airflow. The air-water cooler usually consists of one, two, or four cooling cores combined, the base shape design should be adapted to the generator manufacturer's generator structure requirements.
Application Scope:
Metallurgy, mining, water conservancy, steel rolling, paper making, gas power generation, wind power generation, nuclear power and other industries of the motor/generator used in the cooler
Product Features:
According to different working conditions and media, the heat pipe and tube plate can be selected from carbon steel, stainless steel, copper, titanium alloy, and other materials.
The water chamber can be disassembled for easy cleaning of the heat pipe.
Horizontal, vertical, upward-facing, downward-facing, different installation methods, using different optimized designs.
