Fresh Water Cooler Engine Model - Mitsubishi - S6R2 MPTK2

 

Fresh Water Cooler Engine Model - Mitsubishi - S6R2 MPTK2

Air After Cooler Engine Model - Mitsubishi - S6R2 MPTK2

 

Fresh Water Cooler Engine Model - Mitsubishi - S6R2 MPTK2

 

A fresh water cooler for an engine is an important component in the engine's cooling system, mainly used to cool the engine's coolant to maintain the engine's normal operating temperature.


Working Principle
Heat Exchange: Engine coolant absorbs heat from the engine during operation and then flows into the fresh water cooler. Inside the cooler, the hot coolant exchanges heat with the cooler fresh water. The heat is transferred to the fresh water, causing the temperature of the coolant to decrease while the temperature of the fresh water rises.
Circulation: A water pump is usually used to drive the circulation of the fresh water. The cooled fresh water is pumped into the cooler to continuously take away the heat from the coolant. The heated fresh water is then discharged and may be cooled by other means such as a radiator before being pumped back into the cooler again, forming a continuous cooling cycle.

 

Type
Shell and Tube Cooler: It consists of a shell, tube sheets, tube bundles, and end covers. The fresh water flows through the tubes, while the engine coolant flows in the space between the tubes and the shell. Heat is exchanged through the tube walls. It has a large heat exchange area and high heat exchange efficiency, and is suitable for engines with high heat loads.

 

Maintenance Points
Regular Cleaning: Clean the inside and outside of the cooler regularly to remove dirt, scale, and other deposits to ensure good heat transfer performance.
Inspection of Sealing Parts: Check the sealing gaskets and joints of the cooler regularly to prevent leaks. If leaks are found, the sealing parts should be replaced in time.
Monitoring of Fluid Quality: Monitor the quality of the fresh water and engine coolant regularly. If the water quality is poor or the coolant deteriorates, it should be replaced or treated in time to prevent corrosion and blockage of the cooler.

 

You Might Also Like

Send Inquiry